Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
1 
Aldea, C. M., Shah, S. P. and Karr, A. (1999). "Permeability of cracked concrete." <italic>Materials and Structures</italic>, Vol. 32, pp. 370-376. 10.1007/BF02479629 DOI
2 
Boulfiza, M., Sakai, K., Banthia, N. and Yoshida, H. (2003). "Prediction of chloride ions ingress in uncracked and cracked concrete." <italic>ACI Materials Journal</italic>, Vol. 100, No. 1, pp. 38-48.
3 
De Weerdt, K., Lothenbach, B. and Geiker, M. R. (2019). "Comparing chloride ingress from seawater and NaCl solution in portland cement mortar." <italic>Cement and Concrete Research</italic>, Vol. 115, pp. 80-89. 10.1016/j.cemconres.2018.09.014 DOI
4 
Durdziński, P. T., Haha, M. B., Bernal, S. A., De Belie, N., Gruyaert, E., Lothenbach, B., Méndez, E. M., Provis, J. L., Schöler, A. and Stabler, C. (2017a). "Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements." <italic>Materials and Structures</italic>, Vol. 50, No. 2, pp. 135.
5 
Durdziński, P. T., Haha, M. B., Zajac, M. and Scrivener, K. L. (2017b). "Phase assemblage of composite cements." <italic>Cement and Concrete Research</italic>, Vol. 99, pp. 172-182.
6 
Escalante, J., Gomez, L., Johal, K., Mendoza, G., Mancha, H. and Mendez, J. (2001). "Reactivity of blast-furnace slag in portland cement blends hydrated under different conditions." <italic>Cement and Concrete Research</italic>, Vol. 31, No. 10, pp. 1403-1409. 10.1016/S0008-8846(01)00587-7 DOI
7 
Helgeson, H. C., Kirkham, D. H. and Flowers, G. C. (1981). "Theoretical prediction of the thermodynamic behavior of aqueous electrolytes by high pressures and temperatures; IV, calculation of activity coefficients, osmotic coefficients, and apparent molal and standard and relative partial molal properties to 600 degrees C and 5kb." <italic>American Journal of Science</italic>, Vol. 281, No. 10, pp. 1249-1516. 10.2475/ajs.281.10.1249 DOI
8 
Kulik, D. A., Wagner, T., Dmytrieva, S. V., Kosakowski, G., Hingerl, F. F., Chudnenko, K. V. and Berner, U. R. (2013). "GEM-Selektor geochemical modeling package: Revised algorithm and GEMS3K numerical kernel for coupled simulation codes." <italic>Computers & Geosciences</italic>, Vol. 17, pp. 1-24.
9 
Lothenbach, B., Kulik, D. A., Matschei, T., Balonis, M., Baquerizo, L., Dilnesa, B., Miron, G. D. and Myers, R. J. (2019). "Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials." <italic>Cement and Concrete Research</italic>, Vol. 115, pp. 472-506. 10.1016/j.cemconres.2018.04.018 DOI
10 
Mangat, P., Khatib, J. and Molloy, B. (1994). "Microstructure, chloride diffusion and reinforcement corrosion in blended cement paste and concrete." <italic>Cement and Concrete Composites</italic>, Vol. 16, No. 2, pp. 73-81. 10.1016/0958-9465(94)90002-7 DOI
11 
Millero, F. J., Feistel, R., Wright, D. G. and McDougall, T. J. (2008). "The composition of standard seawater and the definition of the reference-composition salinity scale." <italic>Deep-Sea Research Part I: Oceanographic Research Papers</italic>, Vol. 55, No. 1, pp. 50-72. 10.1016/j.dsr.2007.10.001 DOI
12 
Otieno, M., Alexander, M. and Beushausen, H. D. (2010). "Corrosion in cracked and uncracked concrete-influence of crack width, concrete quality and crack reopening." <italic>Magazine of Concrete Research</italic>, Vol. 62, No. 6, pp. 393-404. 10.1680/macr.2010.62.6.393 DOI
13 
Otieno, M., Beushausen, H. and Alexander, M. (2014). "Effect of chemical composition of slag on chloride penetration resistance of concrete." <italic>Cement and Concrete Composites</italic>, Vol. 46, pp. 56-64. 10.1016/j.cemconcomp.2013.11.003 DOI
14 
Park, S. M. (2020). "Simulating the carbonation of calcium sulfoaluminate cement blended with supplementary cementitious materials." <italic>Journal of CO2 Utilization</italic>, Vol. 41, pp. 101286. 10.1016/j.jcou.2020.101286 DOI
15 
Park, S. M., Abate, S. Y. and Kim, H. K. (2020a). "Hydration kinetics modeling of sodium silicate-activated slag: A comparative study." <italic>Construction and Building Materials</italic>, Vol. 242, pp. 118144.
16 
Park, S. M., Park, H. M., Yoon, H. N., Seo, J. H., Yang, C. M., Provis, J. L. and Yang, B. J. (2020b). "Hydration kinetics and products of MgO-activated blast furnace slag." <italic>Construction and Building Materials</italic>, Vol. 249, pp. 118700.
17 
Park, S. M., Yoon, H. N., Seo, J. H., Lee, H. K. and Jang, J. G. (2019). "Structural evolution of binder gel in alkali-activated materials exposed to electrically accelerated leaching conditions." <italic>Journal of Hazardous Materials</italic>, Vol. 387, pp. 121825.
18 
Parrot, L. (1984). "Prediction of cement hydration." <italic>Proceedings of the British Ceramic Society</italic>.
19 
Scott, A. and Alexander, M. (2007). "The influence of binder type, cracking and cover on corrosion rates of steel in chloride- contaminated concrete." <italic>Magazine of Concrete Research</italic>, Vol. 59, No. 7, pp. 495-505. 10.1680/macr.2007.59.7.495 DOI
20 
Shi, Z., Geiker, M. R., Lothenbach, B., De Weerdt, K., Garzón, S. F., Enemark-Rasmussen, K. and Skibsted, J. (2017). "Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution." <italic>Cement and Concrete Composites</italic>, Vol. 78, pp. 73-83. 10.1016/j.cemconcomp.2017.01.002 DOI
21 
Snellings, R., Salze, A. and Scrivener, K. (2014). "Use of X-ray diffraction to quantify amorphous supplementary cementitious materials in anhydrous and hydrated blended cements." <italic>Cement and Concrete Research</italic>, Vol. 64, pp. 89-98. 10.1016/j.cemconres.2014.06.011 DOI
22 
Song, H. W. and Saraswathy, V. (2006). "Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag-An overview." <italic>Journal of Hazardous Materials</italic>, Vol. 138, No. 2, pp. 226-233. 10.1016/j.jhazmat.2006.07.022 DOI
23 
Wagner, T., Kulik, D. A., Hingerl, F. F. and Dmytrieva, S. V. (2012). "GEM-Selektor geochemical modeling package: TSolMod library and data interface for multicomponent phase models." <italic>The Canadian Mineralogist</italic>, Vol. 50, No. 5, pp. 1173-1195. 10.3749/canmin.50.5.1173 DOI
24 
Yeau, K. Y. and Kim, E. K. (2005). "An experimental study on corrosion resistance of concrete with ground granulate blast-furnace slag." <italic>Cement and Concrete Research</italic>, Vol. 35, No. 7, pp. 1391-1399. 10.1016/j.cemconres.2004.11.010 DOI
25 
Yoon, H. N., Seo, J. H., Kim, S. H., Lee, H. K. and Park, S. M. (2020). "Characterization of blast furnace slag-blended portland cement for immobilization of Co." <italic>Cement and Concrete Research</italic>, Vol. 134, pp. 106089. 10.1016/j.cemconres.2020.106089 DOI