Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
1 
Cho, D. Y., Park, K. B., Woo, Y. Y. and Moon, B. K. (2016). “A study on asphalt paving filler development from industrial by-products and its characteristics in construction site.” Journal of the Korean Recycled Construction Resources Institute, Vol. 4, No. 3, pp. 227-234 (in Korean).DOI
2 
Choi, M. J., Kim, H. J., Kim, Y. J. and Lee, J. J. (2017). “Fundamental properties of asphalt concrete mixture as using TDF fly ash as mineral filler.” Journal of the Korean Society of Civil Engineers, Vol. 37, No. 2, pp. 497-505 (in Korean).DOI
3 
Hafeez, I. and Kamal, M. (2010). “Effects of mineral filler to polymer modified bitumen ratio on the design properties of hot mixasphalt and its performance mehran university research.” Journal of Engineering & Technology, Vol. 29, No. 4, pp. 581-588.
4 
Hwang, S. D. (2004). Chapter 5. Asphalt Concrete Test, KICT, pp. 1-38.
5 
Hwang, S. D. and An, S. H. (2000). “High temperature behavior of asphalt mixtures according to the type of aggregate.” Journal of the Korea Road Pavement Engineering Society, Vol. 2, No. 4, pp. 50-56 (in Korean).
6 
Jeong, J. S., Song, G. Y., Ahn, J. H. and Kim, T. H. (2007). “Utilization of stone sludges produced by stone manufacturing process as asphalt concrete filler.” Journal of the Korean Society of Civil Engineers, Vol. 27, No. 4D, pp. 457-464 (in Korean).
7 
Kim, K. Y. (2007). A study on the application of powdered basalt sludge in construction engineering and its special characteristic, Ph.D. Dissertation, Jeju National University, pp. 55-56, 64-65 (in Korean).
8 
Kim, N. H., Kim, J. C., Hong, J. P. and Kim, K. W. (2010). “Evaluation of fundamental properties of warm-mix recycled asphalt concretes.” Journal of the Korean Society Road Engineers, Vol. 12, No. 4, pp. 111-120 (in Korean).
9 
Kim, Y. G., Kim, J. S., Joe, B. Y., Joe, J. W., Han, J. M. and Lee, H. I. (2006). “Application study of filler for asphalt concrete mixture of industrial by-products (electric arc furnace dust + incinerator recovery dust).” Proceedings of Spring Conference of Korean Society of Waste Management, pp. 71-77 (in Korean).
10 
Kim, Y. W., Park, K. B., Woo, Y. Y. and Moon, B. K. (2017). “Characteristics of asphalt concrete utilizing coal ash based filler.” Journal of the Korean Recycled Construction Resources Institute, Vol. 5, No. 3, pp. 305-312 (in Korean).
11 
Ko, D. W. and Choi, H. B. (2013). “Basic performance evaluation of dry mortar recycled basalt powder sludge.” Journal of the Korea Institute of Building Construction, Vol. 13, No. 2, pp. 131-138 (in Korean).DOI
12 
Lee, D. W., Kim, K. Y. and Kim, D. H. (2015). “A study on the application of powered basalt.”, Proceeding of the Korean Society of Civil Engineers, Gunsan, pp. 163-164 (in Korean).
13 
Lee, D. W., Kim, S. H. and Oh, J. (2016). “Development of recycled- modified asphalt using basalt aggregate.” International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, Vol. 10, No. 1, pp. 11-15.
14 
Ministry of Environment (ME) and Korea Environment Corporation (KECO), (2017). National Waste Generation and Disposal Status in 2016 (in Korean).
15 
Ministry of Land, Infrastructure and Transport (MLIT) (2015). Guide of Production and Construction of Asphalt mixture (in Korean).
16 
Ministry of Land, Transport and Maritime Affairs (MOLIT) (2012). Recycling Aggregate Quality Standard (in Korean).
17 
Rahman, M. N. and Sobhan, M. A. (2013). “Use of non-conventional fillers on asphalt-concrete mixture.” International Journal of Innovation and Applied Studies, Vol. 3, No. 4, pp. 1101-1109.