Al Atik, L. and Abrahamson, N. (2010). "An improved method for nonstationary spectral
matching." Earthquake Spectra, Vol. 26, No. 3, pp. 601-617.
Ang, A. H. S. (1990). "Reliability bases for seismic safety assessment and design."
Proceedings, Fourth U.S. National Conference on Earthquake Engineering, EERI Palm
Springs, Vol. 1, pp. 29-45.
Arias, A. (1970). A measure of earthquake intensity, Seismic Design for Nuclear Power
Plants, edited by Hansen, R. J., MIT Press, Cambridge, Massachusetts, pp. 438-483.
Baeg, J. M., Park, D. H., Yoon, J. M. and Choi, B. H. (2018). "Evaluation of Correlation
between Earthquake Induced Settlement of Fill Dams and Ground Motion Parameters."
Journal of the Korean Geosynthetics Society, Vol. 17, No. 4, pp. 65-72 (in Korean).
Benjamin, J. R. (1988). A criterion for determining exceedance of the operating basis
earthquake, EPRI Report NP-5930, Electric Power Research Institute, Palo Alto.
Ha, I. S. (2011). "Evaluation for fundamental periods of domestic rockfill dams with
micro-earthquake records." Journal of the Korean Geo-Environmental Society, Vol. 12,
No. 6, pp. 53-60.
Hardin, B. O. and Drnevich, V. P. (1972). "Shear modulus and damping in soils: design
equations and curves." Journal of the Soil Mechanics and Foundations Division, Vol.
98, No. 6, pp. 603-624 (in Korean).
Housner, G. W. (1959). "Behavior of structures during earthquakes." Journal of the
Engineering Mechanics Division, ASCE, Vol. 85, No. 4, pp. 109-130.
Ishihara, K. (1996). Soil behaviour in earthquake geotechnics, Oxford University Press
Inc., New York, pp. 36-37.
Kim, J. T., Kim, D. S., Park, H. J. and Kwon, H. K. (2009). "Estimation of dynamic
material properties for fill dam: I. In-situ shearwave velocity profiles." Journal
of the Korean Geotechnical Society, Vol. 25, No. 12, pp. 69-85 (in Korean).
Kuhlemeyer, R. L. and Lysmer, J. (1973). "Finite element method accuracy for wave
propagation problems." Journal of the Soil Mechanics and Foundations Division, Vol.
99, No. 5, pp. 421-427.
Lee, J. S. (2013). "Appropriate input earthquake motion for the verification of seismic
response analysis by geotechnical dynamic centrifuge test." Journal of the Earthquake
Engineering Society of Korea, Vol. 17, No. 5, pp. 209-217 (in Korean).
Lee, J. S. (2016). "Seismic behavior of inverted T-type wall under earthquake Part
II: Effect of input earthquake motion." Journal of the Earthquake Engineering Society
of Korea, Vol. 20, No. 1, pp. 9-19 (in Korean).
Lee, S. H., Kim, D. S., Choo, Y. W. and Choo, H. K. (2009). "Estimation of dynamic
material properties for fill dam: II. Nonlinear deformation characteristics." Journal
of the Korean Geotechnical Society, Vol. 25, No. 12, pp. 87-105 (in Korean).
Lysmer, J. and Kuhlemeyer, R. L. (1969). "Finite dynamic model for infinite media."
Journal of the Engineering Mechanics Division, Vol. 95, No. 4, pp. 859-878.
Ministry of Construction and Transportation (MOCT) (1997). Seismic design criteria
research (II), Earthquake Engineering Society of Korea (in Korean).
Ministry of Land, Infrastructure and Transport (MLIT) (2018). General seismic design
(KDS 17 10 00), Ministry of Land, Infrastructure and Transport, Korea (in Korean).
Ministry of Land, Infrastructure and Transport (MLIT) (2019). Seismic design standard
of dam (KDS 54 17 00), Ministry of Land, Infrastructure and Transport, Korea (in Korean).
Nuttli, O. W. (1979). The relation of sustained maximum ground acceleration and velocity
to earthquake intensity and magnitude, Miscellaneous Paper S-71-1. Report 16, U.S.
Army Corps of Engineers. Waterways Experiment Station, Mississippi, USA.
Park, D. S. (2014). "A study on the seismic resistance of fill-dams by newmark-type
deformation analysis." Journal of the Earthquake Engineering Society of Korea, Vol.
18, No. 4, pp. 161-170 (in Korean).
Park, D. S. and Kishida, T. (2018). "Shear wave velocity profiles of fill dams." Soil
Dynamics and Earthquake Engineering, Vol. 104, pp. 250-258.
Park, D. S. and Kishida, T. (2019). "Shear modulus reduction and damping ratio curves
for earth core materials of dams." Canadian Geotechnical Journal, Vol. 56, No. 1,
pp. 14-22.
Rollins, K. M., Evans, M. D., Diehl, N. B. and Daily III, W. D. (1998). "Shear modulus
and damping relationships for gravels." Journal of Geotechnical and Geoenvironmental
Engineering, Vol. 124, No. 5, pp. 396-405.
Sarma, S. K. and Yang, K. S. (1987). "An evaluation of strong motion records and a
new parameter A95." Earthquake Engineering and Structural Dynamics, Vol. 15, No. 1,
pp. 119-132.
Sawada, Y. and Takahashi, T. (1975). "Study on the material properties and the earthquake
behaviors on rockfill dams." In Proceedings of the 4th Japan earthquake engineering
symposium, Tokyo, pp. 695-702 (in Japanese).
Swaisgood, J. R. (2003). "Embankment dam deformations caused by earthquakes." Proceedings
of 2003 Pacific Conference on Earthquake Engineering, Christchurch, NZ.
Von Thun, J. L., Rochim, L. H., Scott, G. A. and Wilson, J. A. (1988). "Earthquake
ground motions for design and analysis of dams." Earthquake Engineering and Soil Dynamics
II - Recent Advances in Ground-Motion Evaluation, Geotechnical Special Publication,
Vol. 20, pp. 463-481.
Vucetic, M. and Dobry, R. (1991). "Effect of soil plasticity on cyclic response."
Journal of Geotechnical Engineering, Vol. 117, No. 1, pp. 89-107.