Acharyya, S. and Dhar, S. (2008). “A complete GTN model for prediction of ductile
failure of pipe.” Journal of Materials Science, Vol. 43, No. 6, pp. 1897-1909.
0.1007/s10853-007-2369-0
API Specification 5L (2012). Specification for Line Pipe, 45th edition, December 2012.
Aravas, N. (1987). “On the numerical integration of a class of pressure-dependent
plasticity models.” International Journal for Numerical Methods in Engineering, 24,
pp. 1395-1416.
10.1002/nme.1620240713
Fairchild, D. P., Cheng, W., Ford, S. J., Minnaar, K., Biery, N. E., Kumar, A. and
Nissley, N. E. (2007). “Recent advances in curved wide plate testing and implications
for strain-based design.” Proceedings of the Seventeenth International Offshore and
Polar Engineering Conference, Lisbon, pp. 3013-3022.
Franklin, A. G. (1969). “Comparison between a quantitative microscope and chemical
methods for assessment of non-metallic inclusions.” Iron and Steel Institute, 207,
pp. 181-186.
Gurson, A. L. (1977). “Continuum theory of ductile rupture by void nucleation and
growth : Part-1 Yield criteria and flow rules for porous ductile media.” Engineering
Material and Technology, 99, pp. 2-15.
10.1115/1.3443401
Lee, S. J., Yoon, Y. C., Cho, W. Y., Yu, S. M. and Zi, G. (2009). “Large deformation
inelastic analysis of API-X80 steel linepipes.” J. Comput. Struct. Eng., Vol. 22,
No. 4, pp. 363-370 (in Korean).
Liu, M. and Wang, Y. Y. (2006). “Applying gurson type of damage models to low constraint
tests of high strength steels and welds.” Proceedings of the 6th International Pipeline
Conference, Calgary, pp. 1-8.
10.1115/ipc2006-10416
Liu, M., Wang, Y. Y., Horsley, D. and Nanney, S. (2012b). “Multi-tier tensile strain
models for strain-based design part 3-Model evaluation against experimental data.”
Proceedings of the 9th International Pipeline Conference, Paper No. IPC2012-90660,
Calgary, pp. 427-438.10.1115/ipc2012-90660
Liu, M., Wang, Y. Y., Song, Y., Horsley, D. and Nanney, S. (2012a). “Multi-tier tensile
strain models for strain-based design part 2-Development and formulation of tensile
strain capacity models.” Proceedings of the 9th International Pipeline Conference,
Paper No. IPC2012-90659, Calgary, pp. 415-425.10.1115/ipc2012-90659
McClitock, F. A. (1968). “A criterion for ductile fracture by growth of holes.” Journal
of Applied Mechanics, 35, pp. 363-371.10.1115/1.3601204
Minnaar, K., Gioielli, P. C., Macia, M. L., Bardi, F. and Biery, N. E. (2007). “Predictive
FEA modeling of pressurized full-scale tests.” Proceedings of the Seventeenth International
Offshore and Polar Engineering Conference, Lisbon, pp. 3114-3120.
PRCI (Pipeline Research Council International) Report (2011). Second generation models
for strain-based design (Contract PR- ABD-1-Project 2).
Seo, D. H., Yoo, J. Y., Song, W. H., Cho, W. Y. and Kang, K. B. (2009). “Development
of X80/X100 linepipe steel plates and pipes for strain based design pipeline.” Proceedings
of the Nineteenth International Offshore and Polar Engineering Conference, Osaka,
pp. 61-66.
Tvergaard, V. and Needleman, A. (1984). “Analysis of the cup-cone fracture in a round
tensile bar.” Acta Metallurgica, Vol. 32, No. 1, pp. 157-169.10.1016/0001-6160(84)90213-X
Wang, Y. Y., Horsley, D. and Stephens, M. (2008). “Preliminary analysis of tensile
strain capacity of full-scale pipe tests with internal pressure.” Proceedings of the
Eighteenth International Offshore and Polar Engineering Conference, Vancouver, pp.
40-47.
Wang, Y. Y., Liu, M. and Song, Y. (2012b). Tensile strain models for strain-based
design of pipelines, ASME 2012 31st International Conference on Ocean, Offshore and
Arctic Engineering, Rio de Janeiro, pp. 3246-3253.
Wang, Y. Y., Liu, M., Zhang F., Horsley, D. and Nanney, S. (2012a). “Multi-tier tensile
strain models for strain-based design part 1-Fundamental basis.” Proceedings of the
9th International Pipeline Conference, Paper No. IPC2012-90690, Calgary, pp. 447-458.
10.1115/ipc2012-90690
Østby, E. (2015). Strain-based design of pipelines–the important role of numerical
modelling in fracture assessments, Proceedings of the Twenty-fifth International Ocean
and Polar Engineering Conference, Hawaii, pp.543-550.
Østby, E., Hauge, M., Levold, E., Sandvik, A., Nyhus, B. and Thaulow, C. (2008). “Strain
capacity of SENT specimens-Influence of weld metal mismatch and ductile tearing resistance.”
Proceedings of the Eighteenth International Offshore and Polar Engineering Conference,
Vancouver, pp. 64-71.