ABAQUS (2012). ABAQUS Analysis User’s Manual Volume III : Materials, Hibbit, Karlesson & Sorenson, Inc.ABAQUS (2012). ABAQUS Analysis User’s Manual Volume III : Materials, Hibbit, Karlesson & Sorenson, Inc.

Arruda, E. M. and Boyce, M. C. (1993). “A three-dimensional Model for the large stretch behavior of rubber elastic materials.” Journal Mech. Phys. Solids, Vol. 42, No. 2, pp. 389-412.10.1016/0022-5096(93)90013-6Arruda, E. M. and Boyce, M. C. (1993). “A three-dimensional Model for the large stretch behavior of rubber elastic materials.” Journal Mech. Phys. Solids, Vol. 42, No. 2, pp. 389-412.

Baek, U. C., Cho, M. H. and Hawong, J. S. (2011). “Material properties for reliability improvement in the FEA results for rubber parts.” Journal of the Korean Society of Mechanical Engineers A, Vol. 35, No. 11, pp. 1521-1528 (in Korean).10.3795/KSME-A.2011.35.11.1521Baek, U. C., Cho, M. H. and Hawong, J. S. (2011). “Material properties for reliability improvement in the FEA results for rubber parts.” Journal of the Korean Society of Mechanical Engineers A, Vol. 35, No. 11, pp. 1521-1528 (in Korean).

Furukawa, S., Sato, E., Shi, Y., Becker, T. and Nakashima, M. (2013). “Full-Scale shaking table test of a base-isolated medical facility subjected to vertical motions.” Earthquake Engineering & Structural Dynamics, Vol. 42, pp. 1931-1949.10.1002/eqe.2305Furukawa, S., Sato, E., Shi, Y., Becker, T. and Nakashima, M. (2013). “Full-Scale shaking table test of a base-isolated medical facility subjected to vertical motions.” Earthquake Engineering & Structural Dynamics, Vol. 42, pp. 1931-1949.

International Organization for Standardization (2010). Elastomeric seismic-protection isolator. ISO 22762, Geneva.International Organization for Standardization (2010). Elastomeric seismic-protection isolator. ISO 22762, Geneva.

Japan Electric Association (2013). Seismic Design Guideline for Base-Isolated Structures of Nuclear Power Plant. JEAG-4614 (in Japanese).Japan Electric Association (2013). Seismic Design Guideline for Base-Isolated Structures of Nuclear Power Plant. JEAG-4614 (in Japanese).

Kalpakidis, I. V. and Constantinou, M. C. (2008). Effects of Heating and Load History on the Behavior of Lead-Rubber Bearings, Technical Report MCEER-08-0027, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New york.Kalpakidis, I. V. and Constantinou, M. C. (2008). Effects of Heating and Load History on the Behavior of Lead-Rubber Bearings, Technical Report MCEER-08-0027, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New york.

Kim, H. Y., Choi, C., Bang, W. J. and Kim, J. S. (1993). “Large deformation finite element analysis for automotive rubber component.” Journal of the Korean Society of Automotive Engineers, Vol. 15, No. 1, pp. 107-119 (in Korean).Kim, H. Y., Choi, C., Bang, W. J. and Kim, J. S. (1993). “Large deformation finite element analysis for automotive rubber component.” Journal of the Korean Society of Automotive Engineers, Vol. 15, No. 1, pp. 107-119 (in Korean).

Kim, W. D., Kim, W. S., Kim, D. J., Woo, C. S. and Lee, H. J. (2004). “Mechanical testing and nonlinear material properties for finite element analysis of rubber components.” Journal of the Korean Society of Mechanical Engineers A, Vol. 28, No. 6, pp. 848-859 (in Korean).10.3795/KSME-A.2004.28.6.848Kim, W. D., Kim, W. S., Kim, D. J., Woo, C. S. and Lee, H. J. (2004). “Mechanical testing and nonlinear material properties for finite element analysis of rubber components.” Journal of the Korean Society of Mechanical Engineers A, Vol. 28, No. 6, pp. 848-859 (in Korean).

Korea Institute of Machinery & Materials (KIMM) (2004). Development of Integrated Design System for Mechanical Rubber Components, Chapter 2, No. M1-9911-00-0014 (in Korean)Korea Institute of Machinery & Materials (KIMM) (2004). Development of Integrated Design System for Mechanical Rubber Components, Chapter 2, No. M1-9911-00-0014 (in Korean)

Lee, H. Y., Kim, D. W., Lee, J. H. and Nahm, S. H. (2004). “Software and hardware development of micro-indenter for material property evaluation of hyper-elastic rubber.” Journal of The Korean Society of Mechanical Engineers, A Book, Vol. 28, No. 6, pp. 816-825 (in Korean).Lee, H. Y., Kim, D. W., Lee, J. H. and Nahm, S. H. (2004). “Software and hardware development of micro-indenter for material property evaluation of hyper-elastic rubber.” Journal of The Korean Society of Mechanical Engineers, A Book, Vol. 28, No. 6, pp. 816-825 (in Korean).

Lee, J. H., Yoo, B. and Koo, G. H. (1996). “Finite element analysis of seismic isolation bearing.” Journal of the Computational Structural Engineering Institute of Korea, pp. 45-51 (in Korean).Lee, J. H., Yoo, B. and Koo, G. H. (1996). “Finite element analysis of seismic isolation bearing.” Journal of the Computational Structural Engineering Institute of Korea, pp. 45-51 (in Korean).

Ogden, R. W. (1972). “Large deformation isotropic elasticity ; On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids.” Proc. of Royal Society of London, Series A. Mathematical and Physical Sciences, Vol. 326, No. 1567, pp. 565-584.10.1098/rspa.1972.0026Ogden, R. W. (1972). “Large deformation isotropic elasticity ; On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids.” Proc. of Royal Society of London, Series A. Mathematical and Physical Sciences, Vol. 326, No. 1567, pp. 565-584.

Park, K. S. (2001). Finite Element Analysis of Seismic Isolation Rubber Bearing, Master’s Thesis, Korea Advanced Institute of Science and Technology, Korea (in Korean)Park, K. S. (2001). Finite Element Analysis of Seismic Isolation Rubber Bearing, Master’s Thesis, Korea Advanced Institute of Science and Technology, Korea (in Korean)

Park, S. H., Lee, B. U., Hong, M. P. and Ryu, B. R. (2000). “FEM Analysis of alternatively laminated structure constructed of rubber and reinforced aluminium layers.” Journal of the Korean Society of Mechanical Engineers A, pp. 402-406 (in Korean).Park, S. H., Lee, B. U., Hong, M. P. and Ryu, B. R. (2000). “FEM Analysis of alternatively laminated structure constructed of rubber and reinforced aluminium layers.” Journal of the Korean Society of Mechanical Engineers A, pp. 402-406 (in Korean).

Rivlin, R. S. (1948). Large elastic deformations of isotropic materials. I. Fundamental Concepts, Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, Vol. 240, No. 822, pp. 459-490.10.1098/rsta.1948.0002Rivlin, R. S. (1948). Large elastic deformations of isotropic materials. I. Fundamental Concepts, Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, Vol. 240, No. 822, pp. 459-490.

Rivlin, R. S. (1948). Large elastic deformations of isotropic materials. IV. Further developments of the general theory, Philosophical Transactions of the Royal Society of London, Series A, Mathe-matical and Physical Sciences, Vol. 241, No. 835, pp. 379-397.10.1098/rsta.1948.0024Rivlin, R. S. (1948). Large elastic deformations of isotropic materials. IV. Further developments of the general theory, Philosophical Transactions of the Royal Society of London, Series A, Mathe-matical and Physical Sciences, Vol. 241, No. 835, pp. 379-397.

Rivlin, R. S. (1951). Large elastic deformations of isotropic materials. VII. Experimental on the Deformation of Rubber, Philosophical Transactions of the Royal Society of London, Series A, Mathe-matical and Physical Sciences, Vol. 243, No. 865, pp. 251-288.10.1098/rsta.1951.0004Rivlin, R. S. (1951). Large elastic deformations of isotropic materials. VII. Experimental on the Deformation of Rubber, Philosophical Transactions of the Royal Society of London, Series A, Mathe-matical and Physical Sciences, Vol. 243, No. 865, pp. 251-288.

Satoshi, H., Keigo, M., Taichi, M., Takayuki, N. and Chiaki, O. (2007). “Dynamic and static restoration behaviors of pure lead and tin in the ambient temperature range.” Journal of Materials Transactions, Vol. 48, No. 10, pp. 2665-2673.10.2320/matertrans.MRA2007078Satoshi, H., Keigo, M., Taichi, M., Takayuki, N. and Chiaki, O. (2007). “Dynamic and static restoration behaviors of pure lead and tin in the ambient temperature range.” Journal of Materials Transactions, Vol. 48, No. 10, pp. 2665-2673.

Seki, W., Fukahori, Y., Iseda, Y. and Matsunaga, T. (1987). “A large deformation finite element analysis for multilayer elastomeric bearings.” Transaction of the Meeting of the Rubber Division, pp. 856-870.10.5254/1.3536160Seki, W., Fukahori, Y., Iseda, Y. and Matsunaga, T. (1987). “A large deformation finite element analysis for multilayer elastomeric bearings.” Transaction of the Meeting of the Rubber Division, pp. 856-870.

Warn, G. P. and Whittaker, A. S. (2006). “A study of the coupled horizontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings.” Technical Report MCEER-06-0011.Warn, G. P. and Whittaker, A. S. (2006). “A study of the coupled horizontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings.” Technical Report MCEER-06-0011.

Warn, G. P. and Whittaker, A. S. (2008). “Vertical earthquake load on seismic isolation systems in bridges.” Journal of Structural Engineering, ASCE 1696-1704.10.1061/(ASCE)0733-9445(2008)134:11(1696)Warn, G. P. and Whittaker, A. S. (2008). “Vertical earthquake load on seismic isolation systems in bridges.” Journal of Structural Engineering, ASCE 1696-1704.

Warn, G. P., Whittaker, A. S. and Constansinou, M. C. (2007). “Vertical stiffness of elastomeric and lead-rubber seismic isolation bearings.” Journal of Structural Engineering, ASCE 1227-1236.10.1061/(ASCE)0733-9445(2007)133:9(1227)Warn, G. P., Whittaker, A. S. and Constansinou, M. C. (2007). “Vertical stiffness of elastomeric and lead-rubber seismic isolation bearings.” Journal of Structural Engineering, ASCE 1227-1236.

Woo, C. S., Kim, W. D., Kim, K. S. and Kwon, J. D. (2002). “An experimental study on the dynamic characteristics of rubber isolator.” Journal of Elastomer, Vol. 37, No. 3, pp. 183-191 (in Korean).Woo, C. S., Kim, W. D., Kim, K. S. and Kwon, J. D. (2002). “An experimental study on the dynamic characteristics of rubber isolator.” Journal of Elastomer, Vol. 37, No. 3, pp. 183-191 (in Korean).

Yeoh, O. H. (1993). “Some forms of the strain energy function for rubber.” Rubber Chemistry and Technology (ISSN 0035-9475), Vol. 63, No. 5, pp. 754-771.10.5254/1.3538343Yeoh, O. H. (1993). “Some forms of the strain energy function for rubber.” Rubber Chemistry and Technology (ISSN 0035-9475), Vol. 63, No. 5, pp. 754-771.

Yoshida, J., Masato, A., Yozo, F. and Hiroshi, W. (2004). “Three- dimensional finite-element analysis of high damping rubber bearings.” Journal of Engineering Mechanics, Vol. 130, pp. 607-620.10.1061/(ASCE)0733-9399(2004)130:5(607)Yoshida, J., Masato, A., Yozo, F. and Hiroshi, W. (2004). “Three- dimensional finite-element analysis of high damping rubber bearings.” Journal of Engineering Mechanics, Vol. 130, pp. 607-620.

Zhou, Z., Wong, J. and Mahin, S. (2013). “Vertical and 3D isolation system: A Review with Emphasis on Their Use in Nuclear Structures.” SMiRT-22, San Francisco, California, USA, August 18-23.Zhou, Z., Wong, J. and Mahin, S. (2013). “Vertical and 3D isolation system: A Review with Emphasis on Their Use in Nuclear Structures.” SMiRT-22, San Francisco, California, USA, August 18-23.