Al-Amoudi, O. S. B., Maslehuddin, M. and Saadi, M. M. (1995). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 92, No. 1, pp. 15-24.Al-Amoudi, O. S. B., Maslehuddin, M. and Saadi, M. M. (1995). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 92, No. 1, pp. 15-24.

Allahverdi, A. and Abadi, M. M. B. R. (2014). “Resistance of chemically activated high phosphorous slag content cement against frost-salt attack.” Cold Reg. Sci.. Tech., Vol. 98, pp. 18-25.10.1016/j.coldregions.2013.11.001Allahverdi, A. and Abadi, M. M. B. R. (2014). “Resistance of chemically activated high phosphorous slag content cement against frost-salt attack.” Cold Reg. Sci.. Tech., Vol. 98, pp. 18-25.

Aye, T. and Oguchi, C. T. (2011). “Resistance of plain and blended cement mortars exposed to severe sulfate attacks.” Constr. Build. Mater., Vol. 25, No. 6, pp. 2988-2996.10.1016/j.conbuildmat.2010.11.106Aye, T. and Oguchi, C. T. (2011). “Resistance of plain and blended cement mortars exposed to severe sulfate attacks.” Constr. Build. Mater., Vol. 25, No. 6, pp. 2988-2996.

Babu, K. and Kumar, V. S. R. (2000). “Efficiency of GGBS in concrete.” Cem. Concr. Res., Vol. 30, No. 7, pp. 1031-1036.10.1016/S0008-8846(00)00271-4Babu, K. and Kumar, V. S. R. (2000). “Efficiency of GGBS in concrete.” Cem. Concr. Res., Vol. 30, No. 7, pp. 1031-1036.

Beushausen, H., Alexander, M. and Ballim, Y. (2012). “Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios.” Constr. Build. Mater., Vol. 29, pp. 533-540.10.1016/j.conbuildmat.2011.06.018Beushausen, H., Alexander, M. and Ballim, Y. (2012). “Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios.” Constr. Build. Mater., Vol. 29, pp. 533-540.

Cohen, M. and Bentur, A. (1988). “Durability of portland cement- silica fume pastes in magnesium sulfate and sodium sulfate solution.” ACI Mater. J., Vol. 85, No. 3, pp. 148-157.Cohen, M. and Bentur, A. (1988). “Durability of portland cement- silica fume pastes in magnesium sulfate and sodium sulfate solution.” ACI Mater. J., Vol. 85, No. 3, pp. 148-157.

Deja, J. (2003). “Freezing and de-icing salt resistance of blast furnace slag concretes.” Cem. Concr. Compos., Vol. 25, No. 3, pp. 357-361.10.1016/S0958-9465(02)00052-5Deja, J. (2003). “Freezing and de-icing salt resistance of blast furnace slag concretes.” Cem. Concr. Compos., Vol. 25, No. 3, pp. 357-361.

Geng, H. and Li, Q. (2014). “Development of microstructure and chemical composition of hydration products of slag activated by ordinary Portland cement.” Mater. Charact., Vol. 87, pp. 149-158.10.1016/j.matchar.2013.11.012Geng, H. and Li, Q. (2014). “Development of microstructure and chemical composition of hydration products of slag activated by ordinary Portland cement.” Mater. Charact., Vol. 87, pp. 149-158.

Hadj-sadok, A., Kenai, S., Courard, L. and Darimont, A. (2011). “Microstructure and durability of mortars modified with medium active blast furnace slag.” Constr. Build. Mater., Vol. 25, No. 2, pp. 1018-1025.10.1016/j.conbuildmat.2010.06.077Hadj-sadok, A., Kenai, S., Courard, L. and Darimont, A. (2011). “Microstructure and durability of mortars modified with medium active blast furnace slag.” Constr. Build. Mater., Vol. 25, No. 2, pp. 1018-1025.

Higgins, D. D. (1995). “Ground granulated blast furnace slag.” World Cem., Vol. 6, pp. 51-52.Higgins, D. D. (1995). “Ground granulated blast furnace slag.” World Cem., Vol. 6, pp. 51-52.

Hooton, R. D. (2000). “Canadian use of ground granulated blast- furnace slag as a supplementary cementing material for enhanced performance of concrete.” Can. J. of Civ. Eng., Vol. 27, No. 4, pp. 754-760.10.1139/l00-014Hooton, R. D. (2000). “Canadian use of ground granulated blast- furnace slag as a supplementary cementing material for enhanced performance of concrete.” Can. J. of Civ. Eng., Vol. 27, No. 4, pp. 754-760.

Kim, G. W., Kim, B. J., Yang, K. H. and Song, J. K. (2012). “Strength development of blended sodium alkali-activated ground granulated blast-furnace slag (GGBS) mortar.” J. of Kor. Concr. Instit., Vol. 24, No. 2, pp. 137-145 (in Korean).10.4334/JKCI.2012.24.2.137Kim, G. W., Kim, B. J., Yang, K. H. and Song, J. K. (2012). “Strength development of blended sodium alkali-activated ground granulated blast-furnace slag (GGBS) mortar.” J. of Kor. Concr. Instit., Vol. 24, No. 2, pp. 137-145 (in Korean).

Lawrence, C. D. (1992). “The influence of binder type on sulfate resistance.” Cem. Concr. Res., Vol. 22, No. 6, pp. 1047-1058.10.1016/0008-8846(92)90035-TLawrence, C. D. (1992). “The influence of binder type on sulfate resistance.” Cem. Concr. Res., Vol. 22, No. 6, pp. 1047-1058.

Lee, S. H., Kim, W. K. and Kang, S. H. (2012). “Hydration mec-hanism of ground granulated blast furnace slag.” J. of Kor. Concr. Instit., Vol. 24, No. 6, pp. 31-34 (in Korean). Lee, S. H., Kim, W. K. and Kang, S. H. (2012). “Hydration mec-hanism of ground granulated blast furnace slag.” J. of Kor. Concr. Instit., Vol. 24, No. 6, pp. 31-34 (in Korean).

Lee, S. S., Won, C., Kim, D. S. and Park, S. J. (2000). “A study on the engineering properties of concrete using blast-furnace slag powder.” J. of Kor. Concr. Instit., Vol. 12, No. 4, pp. 49-58 (in Korean).Lee, S. S., Won, C., Kim, D. S. and Park, S. J. (2000). “A study on the engineering properties of concrete using blast-furnace slag powder.” J. of Kor. Concr. Instit., Vol. 12, No. 4, pp. 49-58 (in Korean).

Lubeck, A., Gastaldini, A. L. G., Barin, D. S. and Siqueira, H. C. (2012). “Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag.” Cem. Concr. Compos., Vol. 34, No. 3, pp. 392-399.10.1016/j.cemconcomp.2011.11.017Lubeck, A., Gastaldini, A. L. G., Barin, D. S. and Siqueira, H. C. (2012). “Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag.” Cem. Concr. Compos., Vol. 34, No. 3, pp. 392-399.

Moon, H. Y. and Lee, S. T. (2003). “Influence of silicate ratio and additives on the sulphate resistance of portland cement.” Adv. Cem. Res., Vol. 15, No. 3, pp. 91-101.10.1680/adcr.2003.15.3.91Moon, H. Y. and Lee, S. T. (2003). “Influence of silicate ratio and additives on the sulphate resistance of portland cement.” Adv. Cem. Res., Vol. 15, No. 3, pp. 91-101.

Neto, A. A. M., Cincotto, M. A. and Repette, W. (2010). “Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum.” Cem. Concr. Compos., Vol. 32, No. 4, pp. 312-318. 10.1016/j.cemconcomp.2010.01.004Neto, A. A. M., Cincotto, M. A. and Repette, W. (2010). “Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum.” Cem. Concr. Compos., Vol. 32, No. 4, pp. 312-318.

Oner, A. and Akyuz, S. (2007). “An experimental study on optimum usage of GGBS for the compressive strength of concrete.” Cem. Concr. Compos., Vol. 29, No. 6, pp. 505-514. 10.1016/j.cemconcomp.2007.01.001Oner, A. and Akyuz, S. (2007). “An experimental study on optimum usage of GGBS for the compressive strength of concrete.” Cem. Concr. Compos., Vol. 29, No. 6, pp. 505-514.

Oner, M., Erdogdu, K. and Gunlu, A. (2003). “Effect of components fineness on strength of blast furnace slag cement.” Cem. Concr. Res., Vol. 33, No. 4, pp. 463-469.10.1016/S0008-8846(02)00713-5Oner, M., Erdogdu, K. and Gunlu, A. (2003). “Effect of components fineness on strength of blast furnace slag cement.” Cem. Concr. Res., Vol. 33, No. 4, pp. 463-469.

Ortega, J. M., Sanchez, I. and Climent, M. A. (2012). “Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions.” Constr. Build. Mater., Vol. 27, No. 1, pp. 176-183.10.1016/j.conbuildmat.2011.07.064Ortega, J. M., Sanchez, I. and Climent, M. A. (2012). “Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions.” Constr. Build. Mater., Vol. 27, No. 1, pp. 176-183.

Osborne, G. J. (1999). “Durability of Portland blast-furnace slag cement concrete.” Cem. Concr. Compos., Vol. 21, No. 1, pp. 11-21.10.1016/S0958-9465(98)00032-8Osborne, G. J. (1999). “Durability of Portland blast-furnace slag cement concrete.” Cem. Concr. Compos., Vol. 21, No. 1, pp. 11-21.

Ramlochan, T., Thomas, M. D. A. and Hooton, R. D. (2004). “The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature: Part II: Microstructural and Microchemical Investigations.” Cem. Concr. Res., Vol. 34, No. 8, pp. 1341-1356.10.1016/j.cemconres.2003.12.026Ramlochan, T., Thomas, M. D. A. and Hooton, R. D. (2004). “The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature: Part II: Microstructural and Microchemical Investigations.” Cem. Concr. Res., Vol. 34, No. 8, pp. 1341-1356.

Rasheeduzzafar, Dakhil, F. H., Al-Gahtani, A. S., Al-Saadoun, S. S. and Mather, A. B. (1990). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 80, No. 2, pp. 114-122.Rasheeduzzafar, Dakhil, F. H., Al-Gahtani, A. S., Al-Saadoun, S. S. and Mather, A. B. (1990). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 80, No. 2, pp. 114-122.

Sabir, B. B. (1997). “Mechanical properties and frost resistance of silica fume concrete.” Cem. Concr. Compos., Vol. 19, No. 4, pp. 285-294.10.1016/S0958-9465(97)00020-6Sabir, B. B. (1997). “Mechanical properties and frost resistance of silica fume concrete.” Cem. Concr. Compos., Vol. 19, No. 4, pp. 285-294.

Sisomphon, K., Copuroglu, O. and Fraaij, A. L. A. (2010). “Deve-lopment of blast furnace slag mixtures against frost salt attack.” Cem. and Concr. Compos., Vol. 32, No. 8, pp. 630-638.10.1016/j.cemconcomp.2010.06.001Sisomphon, K., Copuroglu, O. and Fraaij, A. L. A. (2010). “Deve-lopment of blast furnace slag mixtures against frost salt attack.” Cem. and Concr. Compos., Vol. 32, No. 8, pp. 630-638.

Teng, S., Yang, T., Lim, D. and Divsholi, B. S. (2013). “Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag.” Constr. Build. Mater., Vol. 40, pp. 875-881.10.1016/j.conbuildmat.2012.11.052Teng, S., Yang, T., Lim, D. and Divsholi, B. S. (2013). “Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag.” Constr. Build. Mater., Vol. 40, pp. 875-881.

Wang, Z., Zeng, Q., Wang, L., Yao, Y. and Li, K. (2014). “Corrosion of rebar in concrete under cyclic freeze-thaw and Chloride salt action.” Constr. Build. Mater., Vol. 53, pp. 40-47.10.1016/j.conbuildmat.2013.11.063Wang, Z., Zeng, Q., Wang, L., Yao, Y. and Li, K. (2014). “Corrosion of rebar in concrete under cyclic freeze-thaw and Chloride salt action.” Constr. Build. Mater., Vol. 53, pp. 40-47.