Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
Title Behavior Analysis of Concrete Structure under Blast Loading : (Ⅱ) Blast Loading Response of Ultra High Strength Concrete and Reactive Powder Concrete Slabs
Authors 이나현 ; 김성배 ; 김장호 ; 조윤구
Page pp.565-575
ISSN 10156348
Keywords blast load;Ultra High Strength Concrete(UHSC);Reactive Powder Concrete(RPC);displacement behavior;failure mode;폭발하중;초고강도 콘크리트;변위거동;파괴모드
Abstract In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.