| Title |
Traffic Volume and Vehicle Speed Calculation Method for type of Sensor Failure of Automatic Vehicle Classification Equipment |
| Authors |
김민현(Kim, Min-heon) ; 오주삼(Oh, Ju-sam) |
| DOI |
https://doi.org/10.12652/Ksce.2016.36.6.1059 |
| Keywords |
AVC 장비;교통량;속도;Piezo 센서;Loop 센서;축 검지시각;Loop on 시각;Loop off 시각 AVC equipment;Traffic volume;Speed;Piezo sensor;Loop sensor;Axle detection time;Loop on time;Loop off time |
| Abstract |
The current operation method for the AVC (Automatic Vehicle Classification) equipment does not generate vehicle speed, traffic volume and vehicle type information when part of the sensors has failed. Inefficiency of current methods would not use the collected data from the normal sensor. In this study was conducted research on the calculating method at the traffic volume and vehicle speed in the sensor failure AVC equipment. The failure situation of the sensor was classified into 4 types. Calculating the traffic volume and vehicle speed information for each type, and accuracy of these informations were analyzed. Analysis results, traffic volume was possible to calculate a highly accurate value (accuracy: 100%, 98%, 97%). In the case of speed, the accuracy of the calculated speed value reaches a level that can be accepted sufficiently (RMSE value is less than 16.8). So, using the methodology proposed in this study are expected to be able to increase the operational efficiency of the AVC equipment. |