All Issue

2021 Vol.41, Issue 6 Preview Page

Structural Engineering

1 December 2021. pp. 637-644
Abstract
References
1
Bannantine, J. A., Comer, J. J. and Handrock, J. L. (1990). Fundamentals of metal fatigue analysis, 1st ed., Chapter 2, Strain-life, Prentice Hall, Englewood Cliffs, N.J., pp. 40-73.
2
Boyce, B. L. and Dilmore, M. F. (2009). "The dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.0002 s-1 to 200 s-1." International Journal of Impact Engineering, Vol. 36, No. 2, pp. 263-271. 10.1016/j.ijimpeng.2007.11.006
3
Chae, Y. B., Kazemibidokhti, K. and Ricles, J. M. (2013). "Adaptive time series compensator for delay compensation of servo-hydraulic actuator systems for real-time hybrid simulation." Earthquake Engineering and Structural Dynamics, Vol. 42, No. 11, pp. 1697-1715. 10.1002/eqe.2294
4
Kabeyasawa, T., Kato, S., Sato, M., Kabeyasawa, T., Fukuyma, H., Tani, M., Kim, Y. S. and Hosokawa, Y. (2014). "Effects of bi‐directional lateral loading on the strength and deformability of reinforced concrete walls with/without boundary columns." 10th U.S. National Conference on Earthquake Engineering, Anchorage, Alaska, USA.
5
Kim, J. H., Kim, D. Y., Han, H. N., Barlat, F. and Lee, M. G. (2013). "Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling." Materials Science and Engineering A, Vol. 559, No. 222-231. 10.1016/j.msea.2012.08.087
6
Marohnic, T., Basan, R. and Franulović, M. (2015). "Evaluation of the possibility of estimating cyclic stress-strain parameters and curves from monotonic properties of steels." 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, Vol. 2015, Prague, Czech Republic, pp. 277-284. 10.1016/j.proeng.2015.02.029
7
Meyer, L. W. and Abdel-Malek, S. (2000). "Strain rate dependence of strength-differential effect in two steels." Journal de Physique IV France, Vol. 10, pp. Pr9-63-Pr9-68. 10.1051/jp4:2000911
8
Nguyen, N. V., Pham, T. H. and Kim, S. E. (2019). "Strain rate- dependent behaviors of mechanical properties of structural steel investigated using indentation and finite element analysis." Mechanics of Materials, Vol. 137. 10.1016/j.mechmat.2019.103089
9
Park, H. G., Baek, J. W., Lee, J. H. and Shin, H. M. (2015). "Cyclic loading tests for shear strength of low‐rise reinforced concrete walls with grade 550 MPa bars." ACI Structural Journal, Vol. 112, No. 3, pp. 299-310. 10.14359/51687406
10
Yu, H. D., Guo, Y. J. and Lai, X. (2009). "Rate-dependent behavior and constitutive model of DP600 steel at strain rate from 10-4 to 10-3 s-1." Materials and Design, Vol. 30, No. 7, pp. 2501-2505. 10.1016/j.matdes.2008.10.001
Information
  • Publisher :Korean Society of Civil Engineers
  • Publisher(Ko) :대한토목학회
  • Journal Title :KSCE JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING RESEARCH
  • Journal Title(Ko) :대한토목학회 논문집
  • Volume : 41
  • No :6
  • Pages :637-644
  • Received Date :2021. 04. 16
  • Revised Date :2021. 06. 14
  • Accepted Date : 2021. 08. 20