All Issue

2020 Vol.40, Issue 4 Preview Page

Structural Engineering


August 2020. pp. 363-370
Abstract


References
1 

He, Z. and Hotate, K. (2002). "Distributed fiber-optic stress- location measurement by arbitrary shaping of optical coherence function." Journal of Lightwave Technology, Vol. 20, No. 9, pp. 1715-1723.

10.1109/JLT.2002.802205
2 

Hong, Y. H. and Lee, H. J. (2007). "Theoretical study of Brillouin OTDA using two pulse lasers." Korean Journal of Optics and Photonics, Vol. 18, No. 3, pp. 196-201 (in Korean).

10.3807/HKH.2007.18.3.196
3 

Horiguchi, T., Kurashima, T. and Tateda, M. (1990). "a technique to measure distributed dtrain in optical fibers." Institute of Electrical and Electronics Engineers (IEEE) Photonics Technology Letters, Vol. 2, No. 5, pp. 352-354.

10.1109/68.54703
4 

Hwang, Y. K., Park, K. T. and Yoo, Y. J. (2007). Diagnosis method for reinforcing state of adhesional reinforcing-member including FRP strip or sheet usnig optical fiber cable sensor, Republic of Korea Patent No. 10-0789924, Korean Intellectctual Property Office (Registered).

5 

Kim, B. C., Jung, K. S., Park, J. S. and Park, K. T. (2018). "Brillouin-OTDR strain response analysis of optical fiber- embedded carbon fiber sheet." Korean Society for Advanced Composite Structure, Vol. 9, No. 3, pp. 1-8 (in Korean).

10.11004/kosacs.2018.9.3.001
6 

Kim, C. Y. (2007). Flexural behavior of RC beam strengthened with prestressed CFRP plates considering bond characteristics, Master Thesis, Department of Civil and Environmental Engineering, Myongji University, Seoul, Korea (in Korean).

7 

Kim, K. S. (2003). "Self diagnosis technique of concrete structure repaired and strengthened by carbon fiber sheets using optical fiber sensors." Journal of the Korean Society for Nondestructive Testing, Vol. 23, No. 2, pp. 133-139 (in Korean).

8 

Kim, Y. H. (2006). Analysis of influencing parameters on strengthening effect of CFRP sheets used to strengthen reinforced concrete beams, Master Thesis, Department of Architectural Engineering, Ewha Womans University, Seoul, Korea (in Korean).

9 

Kim, Y. T. (2002). "Strain measurement and cracks detection of concrete beams using fiber optic sensors." Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp. 221-227 (in Korean).

10 

Lim, D. H. (2013). "An experimental study of flexural strengthening method of reinforced concrete beams with near surface mounted CFRP strips." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 33, No. 1, pp. 131-136 (in Korean).

10.12652/Ksce.2013.33.1.131
11 

Park, H. J., Koo, K. Y., Yi, J. H. and Yun, C. B. (2011). "Development of a damage monitoring technique for jacket-type offshore structures using fiber bragg grating sensors." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 31, No. 6A, pp. 399-408 (in Korean).

12 

Seo, M. S. (2006). Distributed optical fiber sensor using spatially- selective brillouin scattering, Master Thesis, Department of Physics and Technology, Chonbuk National University, Jeonju, Korea (in Korean).

Information
  • Publisher :Korean Society of Civil Engineers
  • Publisher(Ko) :대한토목학회
  • Journal Title :JOURNAL OF THE KOREAN SOCIETY OF CIVIL ENGINEERS
  • Journal Title(Ko) :대한토목학회 논문집
  • Volume : 40
  • No :4
  • Pages :363-370
  • Received Date :2020. 03. 10
  • Revised Date :2020. 04. 27
  • Accepted Date : 2020. 05. 08