All Issue

2019 Vol.39, Issue 1 Preview Page

February 2019. pp. 219-225
Abstract


References
1 

American Association of State Highway and Transportation Officials (AASHTO) (2006). Determining the flexural creep stiffness of asphalt binder using the Bending Beam Rheometer (BBR), AASHTO: Specification T313-06, Washington D.C.

2 

American Association of State Highway and Transportation Officials (AASHTO) (2010). Standard specification for performance-graded asphalt binder, AASHTO: Specification M320-10, Washington D.C.

3 

American Association of State Highway and Transportation Officials (AASHTO) (2012). Standard practice for accelerated aging of asphalt binder using a Pressurized Aging Vessel (PAV), AASHTO: Specification R028-12, Washington D.C..

4 

Amore, D. L., Mele, V. and Campagna, R. (2018). "Quality assurance of Gaver΄s formula for multi-precision laplace transform inversion in real case." Inverse Problems in Science and Engineering, Vol. 26, No. 4, pp. 553-580.

10.1080/17415977.2017.1322963
5 

Basu, A. (2002). An evaluation of the time-temperature equivalence factor and of the physical hardening effects on low-temperature asphalt binder specifications, M.S. thesis, University of Minnesota, U.S..

6 

Cannone, F. A. and Moon, K. H. (2015). "Comparisons of analytical and approximate interconversion methods for thermal stress computation." Canadian Journal of Civil Engineering (CJCE), Vol. 42, No. 10, pp. 705-719.

10.1139/cjce-2014-0558
7 

Cannone, F. A., Marasteanu, M. O., Balmurugan, S. and Negulescu, I. I. (2014a). "Investigation of asphalt mixture strength at low temperatures with the bending beam rheometer." Road Materials and Pavement Design (RMPD), Vol. 15, No. 1, pp. 28-44.

8 

Cannone, F. A., Le, J.-L., Turos, M. and Marasteanu, M. O. (2014b). "Indirect determination of size effect on strength of asphalt mixtures at low temperatures." Materials and Structures, Vol. 47, pp. 157-169.

10.1617/s11527-013-0052-2
9 

Cannone, F. A., Moon, K. H., Wang, D., Riccardi, C. and Wistuba, M. P. (2018). "Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations." Road Materials and Pavement Design (RMPD), Vol. 19, No. 3, pp. 591-604.

10.1080/14680629.2018.1418722
10 

Di Benedetto, H., Sauzéat, C. and Sohm, J. (2009). "Stiffness of bituminous mixtures using ultrasonic waves propagation." Road Materials and Pavement Design (RMPD), Vol. 10, No. 4, pp. 789-814.

10.1080/14680629.2009.9690227
11 

Ebrahimi, M. G., Saleh, M. and Gonzalez, M. A. M. (2014). "Interconversion between viscoelastic functions using the Tikhonov regularization method and its comparison with approximate techniques." Road Material and Pavement Design (RMPD), Vol. 15, No. 4, pp. 820-840.

10.1080/14680629.2014.924428
12 

Ferry, J. D. (1980). Viscoelastic properties of polymers, 3rd Edition, Wiley, New York.

13 

Findley, W. N., Lai, J. S. and Onaran, K. (1976). Creep and relaxation of nonlinear viscoelastic materials, Dover Publications, New York.

PMC492568
14 

Hopkins, I. L. and Hamming, R. W. (1967). "On creep and relaxation." Journal of Applied Physics, Vol. 28, No. 8, pp. 906-909.

10.1063/1.1722885
15 

Marasteanu, M. O. and Anderson, D. A. (1999). "Improved model for bitumen rheological characterization." Presented at: European Workshop on Performance-Related Properties for Bituminous Binders, Belgium.

16 

Marasteanu, M. O., Velasquez, R. A., Cannone Falchetto, A. and Zofka, A. (2009). Development of a simple test to determine the low temperature creep compliance of asphalt mixtures, IDEA Program Final Report, NCHRP-133.

17 

Moon, K. H. (2010). Comparison of thermal stresses calculated from asphalt binder and asphalt mixture creep compliance data, M.S. thesis, University of Minnesota, U.S..

18 

Moon, K. H. (2012). Investigation of asphalt binder and asphalt mixture low temperature properties using analogical models, Ph.D. thesis, University of Minnesota, U.S..

19 

Moon, K. H., Cannone Falchetto, A. and Yeom, W. S. (2014a). "Low-temperature performance of asphalt mixtures under static and oscillatory loading." Arabian Journal for Science and Engineering (AJSE), Vol. 39, No. 11, pp. 7,577-7,590.

20 

Moon, K. H., Cannone Falchetto, A., Park, J. Y., Jeong, J. H. (2014b). "Development of high performance asphalt mastic using fine taconite filler." KSCE J. Civ. Eng., KSCE, Vol. 18, No. 6, pp. 1679-1687.

21 

Moon, K. H., Marasteanu M. O. and Turos, M. (2013). "Comparison of thermal stresses calculated from asphalt binder and asphalt mixture creep tests." American Society for Civil Engineers (ASCE): Journal of Materials in Civil Engineering, Vol. 25, No. 8, pp. 1059-1067.

10.1061/(ASCE)MT.1943-5533.0000651
22 

Park, S. W. and Kim, Y. R. (1999). "Interconversion between relaxation modulus and creep compliance for viscoelastic solids." American Society for Civil Engineers (ASCE): Journal of materials in Civil Engineering, Vol. 11, No. 1, pp. 76-82.

10.1061/(ASCE)0899-1561(1999)11:1(76)
23 

Stehfest, H. (1970). "Algorithm 368: Numerical inversion of Laplace transform." Communication of the Association for Computing Machinery (ACM), Vol. 13, No. 1, pp. 47-49.

10.1145/361953.361969
24 

Velasquez, R., Turos, M., Moon, K. H., Zanko, L. and Marasteanu, M. (2009). "Using recycled taconite as alternative aggregate in asphalt pavements." Construction and Building Materials, Vol. 23, No. 9, pp. 3070-3078.

10.1016/j.conbuildmat.2009.04.003
25 

Villinger, H. (1985). "Solving cylindrical geothermal problems using Gaver-Stehfest inverse Laplace transform." Geophysics, Vol. 50, No. 10, pp. 1581-1587.

10.1190/1.1441848
Information
  • Publisher :Korean Society of Civil Engineers
  • Publisher(Ko) :대한토목학회
  • Journal Title :JOURNAL OF THE KOREAN SOCIETY OF CIVIL ENGINEERS
  • Journal Title(Ko) :대한토목학회 논문집
  • Volume : 39
  • No :1
  • Pages :219-225
  • Received Date :2018. 11. 22
  • Revised Date :2019. 01. 02
  • Accepted Date : 2019. 01. 15