All Issue

2020 Vol.40, Issue 4 Preview Page

Concrete Engineering


August 2020. pp. 371-381
Abstract


References
1 

Abdalla, H. A. (2002). "Evaluation of deflection in concrete members reinforced with fibre reinforced polymer (FRP) bars." Composite Structures, Vol. 56, No. 1, pp. 63-71.

10.1016/S0263-8223(01)00188-X
2 

Acciai, A., D'Ambrisi, A., De Stefano, M., Feo, L., Focacci, F. and Nudo, R. (2016). "Experimental response of FRP reinforced members without transverse reinforcement: Failure modes and design issues." Composites Part B: Engineering, Vol. 89, pp. 397-407.

10.1016/j.compositesb.2016.01.002
3 

ACI-440.1R (2015). Guide for the design and construction of structural concrete reinforced with fiber-reinforced polymer (FRP) bars, Farmington Hills, MI.

4 

Aiello, M. A. and Ombres, L. (2000). "Load-deflection analysis of FRP reinforced concrete flexural members." Journal of Composites for Construction, Vol. 4, No. 4, pp. 164-171.

10.1061/(ASCE)1090-0268(2000)4:4(164)
5 

Benmokrane, B., Elgabbas, F., Ahmed, E. A. and Cousin, P. (2015a). "Characterization and comparative durability study of glass/vinylester, basalt/vinylester, and basalt/epoxy FRP bars." Journal of Composites for Construction, Vol. 19, No. 6, 04015008.

10.1061/(ASCE)CC.1943-5614.0000564
6 

Benmokrane, B., Ali, A. H., Mohamed, H. M., Robert, M. and ElSafty, A. (2015b). "Durability performance and service life of CFCC tendons exposed to elevated temperature and alkaline environment." Journal of Composites for Construction, Vol. 20, No. 1, 04015043.

10.1061/(ASCE)CC.1943-5614.0000606
7 

Bischoff, P. H. (2005). "Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars." Journal of Structural Engineering, Vol. 131, No. 5, pp. 752-767.

10.1061/(ASCE)0733-9445(2005)131:5(752)
8 

Bischoff, P. H. and Gross, S. P. (2010). "Equivalent moment of inertia based on integration of curvature." Journal of Composites for Construction, Vol. 15, No. 3, pp. 263-273.

10.1061/(ASCE)CC.1943-5614.0000164
9 

Bischoff, P. H. and Scanlon, A. (2007). "Effective moment of inertia for calculating deflections of concrete members containing steel reinforcement and fiber-reinforced polymer reinforcement." ACI Structural Journal, Vol. 104, No. 1, pp. 68-75.

10.14359/18434
10 

BS EN 1992, Eurocode 2 (2004). Design of concrete structures.

11 

Canadian Standards Association (2012). Design and construction of building components with fibre-reinforced polymers (No. 2). Canadian Standards Association.

12 

CEB-FIB (2010). CEB-FIB model code 2010-final draft. Thomas Thelford, Lausanne, Switzerland.

13 

Choi, S. W., Yang, J. H. and Kim, W. (2010). "Influence of tension stiffening effect on deflection and crack width in RC members." Journal of the Korea Concrete Institute, Vol. 22, No. 6, pp. 761-768 (in Korean).

10.4334/JKCI.2010.22.6.761
14 

Docevska, M., Arangjelovski, T., Markovski, G. and Nakov, D. (2018). "Numerical and analytical model for serviceability limit states of RC elements." Građevinar, Vol. 70, No. 11, pp. 943-952.

10.14256/JCE.2050.2017
15 

Fib Bulletin 40 (2007). FRP reinforcement in RC structures, TG9.3;

16 

Fib Bulletin 50 (2010). Bulletin: Structural concrete: textbook on behaviour, design and performance; updated knowledge of the CEB/FIB Model Code 1990.

17 

Fib Bulletin 51 (2010). Bulletin: Structural concrete: textbook on behaviour, design and performance; updated knowledge of the CEB/FIB Model Code 1990.

18 

Gooranorimi, O., Claure, G., Suaris, W. and Nanni, A. (2018). "Bond-slip effect in flexural behavior of GFRP RC slabs." Composite Structures, Vol. 193, pp. 80-86.

10.1016/j.compstruct.2018.03.027
19 

Gribniak, V., Cervenka, V. and Kaklauskas, G. (2013). "Deflection prediction of reinforced concrete beams by design codes and computer simulation." Engineering Structures, Vol. 56, pp. 2175-2186.

10.1016/j.engstruct.2013.08.045
20 

Kharal, Z. and Sheikh, S. (2017). "Tension stiffening and cracking behavior of glass fiber-reinforced polymer-reinforced concrete." ACI Structural Journal, Vol. 114, No. 2, pp. 299-310.

10.14359/51689420
21 

Ko, S. H. (2014). "Experimental study for GFRP reinforced concrete beams without stirrups." Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 18, No. 2, pp. 21-29 (in Korean).

10.11112/jksmi.2014.18.2.021
22 

Pecce, M., Manfredi, G. and Cosenza, E. (2000). "Experimental response and code models of GFRP RC beams in bending." Journal of Composites for Construction, Vol. 4, No. 4, pp. 182-190.

10.1061/(ASCE)1090-0268(2000)4:4(182)
23 

Pilakoutas, K., Neocleous, K. and Guadagnini, M. (2002). "Design philosophy issues of fiber reinfored polymer reinforced concrete structures." Journal of Composites for Construction, Vol. 6, Nol. 3, pp. 154-161.

10.1061/(ASCE)1090-0268(2002)6:3(154)
Information
  • Publisher :Korean Society of Civil Engineers
  • Publisher(Ko) :대한토목학회
  • Journal Title :JOURNAL OF THE KOREAN SOCIETY OF CIVIL ENGINEERS
  • Journal Title(Ko) :대한토목학회 논문집
  • Volume : 40
  • No :4
  • Pages :371-381
  • Received Date :2020. 03. 22
  • Revised Date :2020. 07. 16
  • Accepted Date : 2020. 06. 17