All Issue

2020 Vol.40, Issue 2 Preview Page

2019 Convention Article


April 2020. pp. 177-182
Abstract


References
1 

An, T., Pant, B., Kim, S. Y., Park, M., Park, S. J. and Kim, H. Y. (2017). "Mechanical and optical properties of electrospun nylon-6,6 nanofiber reinforced cyclic butylene terephthalate composites." Journal of Industrial and Engineering Chemistry, Vol. 55, pp. 35-39.

10.1016/j.jiec.2017.06.044
2 

Arinstein, A. (2018). Electrospun Polymer Nanofibers, chapter 1. USA, Pan Stanford Publishing Pte. Ltd., pp. 1-4.

10.1201/9781315364629-1
3 

ASTM C109/C109M-16a (2016), Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, 2016, www.astm.org.

4 

ASTM C307-03 (2012). Standard test method for tensile strength of chemical-resistant mortar, grouts, and monolithic surfacings, ASTM International, West Conshohocken, PA, 2012, www.astm.org.

5 

Baji, A., Mai, Y. W., Wong, S. C., Abtahi, M. and Du, X. (2010). "Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers." Composites Science and Technology, Vol. 70, pp. 1401-1409.

10.1016/j.compscitech.2010.04.020
6 

Brown, L. and Sanchez, F. (2018). "Influence of carbon nanofiber clustering in cement pastes exposed to sulfate attack." Construction and Building Materials, Vol. 166, pp. 181-187.

10.1016/j.conbuildmat.2018.01.108
7 

Flores, Y. C., Cordeiro, G. C., Filho, R. D. T and Tavares, L. M. (2017). "Performance of Portland cement pastes containing nano- silica and different types of silica." Construction and Building Materials, Vol. 146, pp. 524-530.

10.1016/j.conbuildmat.2017.04.069
8 

Foley, E. M., Kim, J. J. and Taha, M. M. R. (2012). "Synthesis and nano-mechanical characterization of calcium-silicate-hydrate (C-S-H) made with 1.5 CaO/SiO2 mixture." Cement and Concrete Research, Vol. 42, pp. 1225-1232.

10.1016/j.cemconres.2012.05.014
9 

Han, T., Nag, A., Mulkhopadhyay, S. C. and Xu, Y. (2019). "Carbon nanotubes and its gas-sensing applications: A review." Sensors and Actuators A: Physical, Vol. 291, pp. 107-143.

10.1016/j.sna.2019.03.053
10 

Hsieh, Y. C., Chou, Y. C., Lin, C. P., Hsieh, T. F. and Shu, C. M. (2010). "Thermal analysis of multi-walled carbon nanotubes by kissinger's corrected kinetic equation." Aerosol and Air Quality Research, Vol. 10, No. 3, pp. 212-218.

10.4209/aaqr.2009.08.0053
11 

Jafari, S. (2018). "Engineering applications of carbon nanotubes." Carbon Nanotube-Reinforced Polymers, pp. 25-40.

10.1016/B978-0-323-48221-9.00002-9
12 

Katsogiannis, K. A. G., Vladisavljević, G. T. and Georgiadou, S. (2015). "Porous electrospun polycaprolactone (PCL) fibres by phase separation." European Polymer Journal, Vol. 69, pp. 284-295.

10.1016/j.eurpolymj.2015.01.028
13 

Kim, J. J., Foley, E. M. and Taha, M. M. R. (2013). "Nano- mechanical characterization of synthetic calcium-silicate-hydrate (C-S-H) with varying CaO/SiO2 mixture ratios." Cement & Concrete Composites, Vol. 36, pp. 65-70.

10.1016/j.cemconcomp.2012.10.001
14 

Kochov, K., Gauvin, F., Schollbach, K. and Brouwers, H. J. H. (2020). "Using alternative waste coir fibres as a reinforcement in cement-fibre composites." Construction and Building Materials, Vol. 231.

10.1016/j.conbuildmat.2019.117121
15 

Kroschwitz, J. I. (1998). Encyclopedia of polymer science and engineering, John Wiley & Sons, New Jersey, USA.

16 

Liu, W., Zhang, S., Chen, X., Yu, L., Zhu, X. and Feng, Q. (2010). "Thermal behavior and fire performance of nylon-6,6 fabric modified with acrylamide by photografting." Polymer Degradation and Stability, Vol. 95, No. 9, pp. 1842-1848.

10.1016/j.polymdegradstab.2010.04.023
17 

Mehta, P. K. and Monteiro, P. J. M. (2006). Concrete: microstructure, properties, and materials - Chapter 6. United States of America, The McGraw-Hill Companies, Inc: 203-252, New York, NY.

18 

Mohsen, M. O., Taha, R., Taqa, A. A. and Shaat, A. (2017). "Optimum carbon nanotubes' content for improving flexural and compressive strength of cement paste." Construction and Building Materials, Vol. 150, pp. 395-403.

10.1016/j.conbuildmat.2017.06.020
19 

Naidu, P. K., Pulagara, N. V. and Dondapati, R. S. (2014). "Carbon nanotubes in engineering applications: A review." Progress in Nanotechnology and Nanomaterials, Vol. 3, No. 4, pp. 79-82.

10.5963/PNN0304003
20 

Navarro-Pardo, F., Martínez-Barrera, G., Martínez-Hernández, A. L., Castaño, V. M., Rivera-Armenta, J. L., Medellín-Rodríguez, F. and Velasco-Santos, C. (2013). "Effects on the thermo- mechanical and crystallinity properties of nylon 6,6 electrospun fibres reinforced with one dimensional (1D) and two dimensional (2D) carbon." Materials, Vol. 6, No. 8, pp. 3494-3513.

10.3390/ma608349428811448PMC5521318
21 

Nguyen, T. N. M., Moon, J. and Kim, J. J. (2020). "Microstructure and mechanical properties of hardened cement paste including Nylon 66 nanofibers." Construction and Building Materials, Vol. 23.

10.1016/j.conbuildmat.2019.117134
22 

Rocha, V. V., Ludvig, P., Trindade, A. C. C. and Silva, F. dA. (2019). "The influence of carbon nanotubes on the fracture energy, flexural and tensile behavior of cement based composites." Construction and Building Materials, Vol. 209, pp. 1-8.

10.1016/j.conbuildmat.2019.03.003
23 

Saleh, H. M., El-Sheikh, S. M., Elshereafy, E. E. and Essa, A. K. (2019). "Mechanical and physical characterization of cement reinforced by iron slag and titanate nanofibers to produce advanced containment for radioactive waste." Construction and Building Materials, Vol. 200, pp. 135-145.

10.1016/j.conbuildmat.2018.12.100
24 

Suzuki, A., Chen, Y. and Kunugi, T. (1998). "Application of a continuous zone-drawing method to nylon 66 fibres." Polymer, Vol. 39, No. 22, pp. 5335-5341.

10.1016/S0032-3861(97)10233-6
25 

Taylor, H. F. W. (1997). Cement Chemistry, Chapter 5. USA, Thomas Telford.

10.1680/cc.25929
26 

Thenmozhi, S., Dharmaraj, N., Kadirvelu, K. and Kim, H. Y. (2017). "Electrospun nanofibers: New generation materials for advanced applications." Materials Science and Engineering B, Vol. 217, pp. 36-48.

10.1016/j.mseb.2017.01.001
27 

Treacy, M. M. J, Ebbesen, T. W. and Gibson, J. M. (1996). "Exceptionally high Young's modulus observed for individual carbon nanotubes." Nature, Vol. 381, pp. 678-680.

10.1038/381678a0
28 

Walters, D. A., Ericson, L. M., Casavant, M. J., Liu, J., Colbert, D. T., Smith, K. A. and Smalley, R. E. (1999). "Elastic strain of freely suspended single-wall carbon nanotube ropes." Applied Physics Letters, Vol. 74, No. 25, pp. 3803-3805.

10.1063/1.124185
29 

Wang, M., Wang, R., Yao, H., Farhan, S., Zheng, S., Wang, Z., Du, C. and Jiang, H. (2016). "Research on the mechanism of polymer latex modified cement." Construction and Building Materials, Vol. 111, pp. 710-718.

10.1016/j.conbuildmat.2016.02.117
30 

Xue, J., Xie, J., Liu, W. and Xia, Y. (2017). "Electrospun nanofibers: New concepts, materials, and applications." Accounts of Chemical Research, Vol. 50, No. 8, pp. 1976-1987.

10.1021/acs.accounts.7b0021828777535PMC6589094
31 

Yu, M. F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F. and Ruoff, R. S. (2000). "Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load." Science, Vol. 287, No. 5453, pp. 637-640.

10.1126/science.287.5453.63710649994
32 

Zussman, E., Burman, M., Yarin, A. L., Khalfin, R. and Cohen, Y. (2006). "Tensile deformation of electrospun nylon-6,6 nanofibers." Journal of Polymer Science, Part B, Polymer Physic, Vol. 44, No. 10, pp. 1482-1489.

10.1002/polb.20803
Information
  • Publisher :Korean Society of Civil Engineers
  • Publisher(Ko) :대한토목학회
  • Journal Title :JOURNAL OF THE KOREAN SOCIETY OF CIVIL ENGINEERS
  • Journal Title(Ko) :대한토목학회 논문집
  • Volume : 40
  • No :2
  • Pages :177-182
  • Received Date :2019. 11. 19
  • Revised Date :2019. 12. 02
  • Accepted Date : 2019. 12. 12